Your Cart

EVERYTHING YOU NEED TO KNOW ABOUT REDRAGON GAMING MICE

Q: How to program a Redragon mouse?

A: You can program Redragon mouse with its software except for the left button.

 

Q: How to program a Redragon mouse with the macro function?

 *Please ensure that at least one "left click" function is retained to guarantee normal function of the mouse.

 Step1. Install the software

the instruction for macro creation on mice

Step2. Choose the button you need to set macro, click it and find out the option of “MACRO-MACRO MANAGER”

how to do macro on m908 mouse

Step3. Click the Start to record the keys you need, then click Stop when finished, press OK and Apply to save.

set macro on mouse

Please notice that this macro function cannot record the action you need (such as holding the fire button automatically or record the Ctrl+C to realize Copy function etc.), only keys on keyboards can be recorded with delay times.

 

Q: How to change Redragon mice dpi?

A: Press DPI buttons on the mouse to change the dpi or set the dpi via software if the mouse has.

 

Q: Is it possible to make right-click (holding) after macro?

A: You could try to add the right-click into the end of the macro and set the max time of delay.

 

Q: Is it possible to manually hold right click while a left mouse macro is active?

A: The left key is locked and no macro cannot be set. 

 

Q: Is it available to program the left button from a mouse with macro function?

A: Sorry, the left button is not available for macro. There will be conflict when applied with programmed keys on the left button.

How to Record Macro with Mouse Buttons and Keys in Redragon Impact Software--- Dragon Blogger Technology and Entertainment


28 comments

  • what does the button mode switch located at the lower surface of the mouse does?

    yossry elshazly
  • is there a programmable button that turns off the fire key?

    fernindaz kaerek
  • is there a programmable button that turns off the fire key?

    fernindaz kaerek
  • I am having issues with my World of Warcraft bindings. I set my mouse macros to 1-4. I press only the 4 buttons, but everytime i press a button on my mouse, my right click cancels ingame. Any advice?

    Jamie
  • PLEASE add a toggle function to the macro manager..

    Kenneth Long

Leave a comment

Please note, comments must be approved before they are published